MC4220

20" WIDE x 17" DEEP Frame and seat cushion

ARM TROUGHS (One Pair). One-piece channel Forearm Pads

COMMODE PAN for chair with 20"x20" frame. Includes 12" x 14" x 6" pan, aluminum u-channel rails, stainless mounting hardware. Note: $5.00 extra for shipping for this item

COMMODE LOWERING BRACKETS: lowers commode pan by 4"

SOLID CUSHION (2" thick x 20" x 20") Naugahyde covered cushion with NO commode opening (upgrade)

QUICK PIN. (8) 3/8" stainless pins installed on a solid H4 cushion and a standard commode cushion to provide easy change between commode and solid cushions

CUSTOM CUSHION designed and fabricated to customer's specifications (upgrade) (please allow 2-3 weeks lead time)

CUSTOM GEL CUSHION designed and fabricated to customer's specifications (upgrade) (please allow 2-3 weeks lead time)

SEAT DEPTH ADAPTERS (2) 2-hole adapters that increases the "effective" seat depth by 1.5"

SPLASH GUARD/ABDUCTOR (1) (4" thick x 4" wide x 6" tall) attached to front of seat frame, removable

Directional Splash Guard that mounts to the underside of 20" wide seat frames. ***If used with a commode pan, lowering brackets will be required***

SPLASH GUARD (1) spring loaded under-side cloth splash guard (prevents splashing between the under side of the cushion and commode)

T-BACK CUSHION (20" wide at the top x 11" tall) slightly curved Naugahyde covered back cushion (upgrade)

CLOTH BACKREST ASSEMBLY (1) adjustable grey cloth back with two openings and three adjustable straps to adjust tension (for non-sliding units) If laterals are ordered, the cloth back will have 4 openings. *Please note that units with a headrest will require the addition of the L3 headrest assembly.

BACK POST EXTENDERS (2) extends the backrest posts and back cushion height by 4"

LATERALS (2) quick release swing-away (pad size: 0.5" thick x 5" long x 3.5" high)

HIP GUIDES (2) side mounted pads (5" x 7" pads) that attach to Nuprodx cantilever arms

BASIC CHEST POSITIONING BELT (1) 2" wide with d-ring, hook and loop closure

BODYPOINT CHEST positioning belt, 2-piece w/ grommet mounting - 4 " wide, padded Large (Fit Range: 31" to 41")

BODYPOINT CHEST positioning belt, 2-piece w/ grommet mounting - 4 " wide, padded XLarge (Fit Range: 32" to 52")

BASIC HIP POSITIONING SEAT BELT (1) 2" wide with d-ring, hook and loop closure

BODYPOINT HIP positioning seat belt, 2-piece w/ grommet mounting - 4 " wide, padded Large (Fit Range: 31" to 41")

BODYPOINT HIP positioning seat belt, 2-piece w/ grommet mounting - 4 " wide, padded XLarge (Fit Range: 32" to 52")

Quick Release knobs for BodyPoint Belts

HEEL STRAPS (2) 2" wide with mounting hardware (mounts to the footplates)

Basic Calf Strap, 2" wide, hook and loop closure

CALF PANEL (BodyPoint SP103L) Padded Aeromesh, for 20" wide chairs

DROP BAR (adjustable cross bar), two clamps and 1 x 1 tubing which adjust vertically along the legs of a multiCHAIR to stabilize side of frame that will be removed to increase side or front access

EXTRA WIDE OFFSET OUTER LEGS (PAIR) 3" wide offsets (upgrade) to increase rear commode clearance, to widen overall footprint for additional stability, or to accomodate narrower/wider bathtubs

BENT LEGS (2) 90 degree bent inner legs with 5" casters (upgrade)

CONNECTOR BRIDGE (1) locking custom bridge length 9" to 12" and 14" to 23" (upgrade) ***DO NOT SELECT IF YOU WANT THE STANDARD BRIDGE***

CUSTOM CONNECTOR BRIDGE (1) bridge designed and fabricated to customer's specifications (for lengths other than 9" to 23") (upgrade)

Adjustable Headrest-20" vertical and 6" horizontal adjustment, molded head support of self skinning polyurethane foam, with anodized mounting plate and fasteners.

Pair of anti-tippers for self-propel models

Call Nuprodx for custom work: 707-934-8266